The Solution To The Spring Of The Pump Head Of The Hand Treatment Pump

The solution to the spring of the pump head of the Hand Treatment Pump :

1. Change a pump head
2. Press and hold the original pump head, then hold the bottle tightly and turn it counterclockwise.
3. Hold the bottle tightly, first tighten the cap of the bottle clockwise, then tighten the pump head, the tighter the pump head, the better, until it can no longer be rotated, some will bounce off after tightening, and some need to be rotated counterclockwise Come back a little and bounce off immediately. (Remember to ensure that the bottle cap does not rotate along with this process)
4. If the cap of the shower gel does not rise, it may be due to the problem of pressing the spring in the pump. At this time, the bottle cap can be unscrewed and the tightness of the spring can be adjusted to make the pressing pump of the shampoo bounce again.
5. You can try to put the bottle upside down and tap it lightly, then rotate it to the left or right according to the direction indicated by the bottle mouth, and it will pop up automatically when you hear a click sound.