How To Troubleshoot Daily Malfunctions Of Mini Trigger Sprayer

4 daily failures of Mini Trigger Sprayer and their treatment methods:

1. Insufficient spray pressure and poor atomization: If the water inlet part is set up by dirt, the water inlet part can be removed and the dirt can be removed with a cloth; if the part is damaged, a new part can be replaced; if the connection part is not installed The sealing ring or the air leakage due to the damage of the sealing ring, can be installed or replaced.

2. No fogging: If the oblique hole of the nozzle body is blocked by dirt, the oblique hole can be cleared; if the nozzle is blocked, the nozzle can be removed and cleaned; if the internal parts of the casing are blocked, the corresponding parts should be cleaned to achieve ease Spray requirements.

3. The sprayer cannot be pressed: if the button is not tightened, the button should be adjusted and tightened; if the washer on the button core is worn out, the washer should be replaced; the button cannot be pressed because it is stored for a long time or used for a long time, just in time Go to replace the buttons.

4. Water leakage in each connection part: if the joint is loose, all kinds of parts should be tightened; if the gasket is not flat or damaged, the gasket should be flat or replaced; if the gasket shrinks and hardens, it can be immersed in animal oil Use after softening.